Home > News > Information >

How to Install SteelTubular Mobile Scaffolding System

News Group
How to Install SteelTubular Mobile Scaffolding System
Issue Time:2019-08-06
Scaffolding Mobile frame scaffolding refers to the construction site for the workers to operate and resolve the vertical and horizontal transport and erection of various carriers. It has a simple assembly and disassembly system, good bearing performance, safe and reliable, the development of fast, mobile scaffold in a variety of new scaffolding, the development of the earliest usage is also speed up. Mobile scaffolding successfully developed by the United States at first, to the early 1960s, Europe, Japan and other countries have applied and then the  development of such scaffolding. China from the late 1970s, has introduced from Japan, the United States, Britain and other countries to use this frame scaffolding.

Mobile scaffolding for safety reasons, be sure to observe the following points, otherwise it may fall and other serious accidents collapse occurred:

1. Do not use defective, damaged parts.

2, follow the installation sequence and allowable loads.

3. Please note that compliance with each point in the use and construction.

4, in the mobile scaffold before, so that all workers from scaffold work platform to the ground.

5, the moving speed of 0.75m / s, before moving, as a result of surface friction casters and other reasons, can not go to the position, and not forcibly push the stent caused the wheel damage, tipping bracket.

 6, the stent should be avoided by the sudden horizontal impact, impact.

7, each 1.8mx0.9m the work surface, the load should be less than 200kg.

8, prohibited hanging weights outside the bracket to prevent the bracket due to severe partial load and overturning.

9, the carrying capacity of the caster is 200kg / a, not to destroy it due to overloading.

10, after moving in place, should depress the brake wheels, the wheels will lock.