Home > News > Information >

It is simple for the production of manufacturing of cuplock scaffoldings

It is simple for the production of manufacturing of cuplock scaffoldings
Issue Time:2019-07-02
Production process of scaffold used is very simple, the main raw material is to use Φ48 × 3.5, Q235 welded pipe and the upper and lower welding Bowl, or even the old-fashioned type fastener pipe scaffold improvement. In addition to the production process is simple , is relatively modest in terms of cost .

Scaffold in life than a lot of scaffolding fastener , scaffold can generally use about 10 years since the abandoned bolt connection . Member touched by knock -resistant. Even if rust does not affect cannibalize use .

Scaffold many forms, scaffold attached to the structure , usually lifting or lifting equipment is fixed and independent of scaffold from the bearing bracket , bearing bracket fixed to the concrete structure , the use of commitment the power rack scaffold frame body lift after lift scaffold frame body structure and fixed in place , re-use of  frame scaffolding body together with the load-bearing frame lifting device to a new height and fixed .